Archive Origin · Transportation & Automotive

Technical College Tire Service

Transportation & Automotive · Student demonstration
FIVE STEPS RECORDED
Technical college task
Automotive tire service
01 · Tire Changer 02 · Position Wheel 03 · Mount Assembly 04 · Service Valve 05 · Inflate Tire
Step 01 · Tire Changer Setup & Safety Check
Source demonstration Short clips shown in sequence from the original student task.
01 · Tire Changer Setup & Safety Check
Task preview for step 1
Prepare the tire machine, confirm the work area is clear, and stage the tools needed before handling the wheel assembly.
  1. Recorded 2026-06-05 10:55:00Z
  2. Step Machine setup and safety check
  3. Moment Work area cleared and tools staged
  4. Shown here Step preview and source clip shown as part of the full sequence
  5. Open watch source clip →
02 · Position Wheel & Tire for Service
Task preview for step 2
Move the wheel and tire into place and align the assembly so it can be safely loaded onto the tire changer.
  1. Recorded 2026-06-05 10:57:00Z
  2. Step Wheel and tire positioned for service
  3. Moment Assembly aligned for safe loading
  4. Shown here Step preview and source clip shown as part of the full sequence
  5. Open watch source clip →
03 · Mount Assembly & Begin Tire Removal
Task preview for step 3
Set the assembly on the changer and begin working the tire off the rim using the machine controls and mounting head.
  1. Recorded 2026-06-05 11:00:00Z
  2. Step Assembly mounted and tire removal started
  3. Moment Machine controls used at the mounting head
  4. Shown here Step preview and source clip shown as part of the full sequence
  5. Open watch source clip →
04 · Service Valve Stem & Rim Opening
Task preview for step 4
Work at the valve opening and rim interface to service the stem area before the tire is fully reassembled and inflated.
  1. Recorded 2026-06-05 11:03:00Z
  2. Step Valve stem area serviced at the rim opening
  3. Moment Rim interface worked before reassembly
  4. Shown here Step preview and source clip shown as part of the full sequence
  5. Open watch source clip →
05 · Inflate Tire & Check Pressure
Task preview for step 5
Connect the air line, seat the assembly, and confirm inflation with a visible pressure check at the machine gauge.
  1. Recorded 2026-06-05 11:06:00Z
  2. Step Tire inflated and pressure checked
  3. Moment Gauge reading confirmed during inflation
  4. Shown here Step preview and source clip shown as part of the full sequence
  5. Open watch source clip →
See the full workflow at Archive Origin.